IADCWOB(kN/mm)RPM(r/min)Formation
IADC | WOB(kN/mm) | RPM(r/min) | Formation |
114\115 | 0.3-0.75 | 180-50 | Soft formation with low compressive strength and high drillability,such as mudstone,clay,chalk,etc |
116\117 | 0.3-0.8 | 150-70 | Soft formation with low compressive strength and high drillability,such as mudstone,clay,chalk,etc |
124\125 | 0.3-0.85 | 180-60 | Soft formation with low compressive strength and high drillability,such as mudstone,clay,salt,loose stands,soft limestone,etc |
126\127 | 0.3-0.9 | 150-60 | Soft formation with low compressive strength and high drillability,such as mudstone,clay,salt,loose stands,soft limestone,etc |
134\135 | 0.35-0.95 | 150-50 | Soft to medium formation with low compressive strength or soft with harder streaks,such as mudstone,shale,soft limestone ,sands,etc |
136\137 | 0.35-1.0 | 120-60 | Soft to medium formation with low compressive strength or soft with harder streaks,such as mudstone,shale,soft limestone ,sands,etc |
214\215 | 0.4-0.95 | 150-60 | medium hard formation with high compressive strength ,such as medium soft shale,anhydrite,medium soft limestone ,medium soft sandstone as well as thick and hard streaks,etc |
216\217 | 0.4-1.0 | 100-60 | medium hard formation with low compressive strength ,such as medium soft shale,limestone and sandstone as well as thick and hard streaks,etc |
244 | 0.35-0.95 | 150-50 | medium hard formation with high compressive strength ,such as hard shale,sands ,limestone,etc |
246\247 | 0.4-1.0 | 80-50 | medium hard formation with high compressive strength ,such as hard shale,sands ,limestone,etc |
324\325 | 0.4-1.0 | 120-50 | hard formation with high strength and abrasiveness such as hard limestone,hard sands,dolomite,hard shale,etc |
Cutting Structure
In response to the characteristics that inserts in different areas on the cone have different cutting actions, conical inserts are placed in permanent contact area and wedge inserts are placed in alternative contact area so that the drilling efficiency is greatly improved. Wear resistance of cutting structure is enhanced by setting diamond inserts in the permanent contact area of the cone where inserts are severely worn. Tungsten carbide inserts are placed on cone top face to protect cone body from abrasive erosion.
Gauge Structure
With active cutting gauge protection inserts on bit body, the bit has good gauge protection and updrill capability.
Bearing Structure
High precision journal bearing. Balls lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy. Abrasion resistance and seizure resistance of the bearing are improved. Compared with three cone bit, the leg bearing is bigger, so it can receive higher WOB and high reliability.
Hydraulic Design
Small angled watercourse design increased the shirttail thickness and can effectively prevent the watercourse erosion. Opitmized hydraulics structure improves the cleaning capability and increase ROP.
Product application
It is suitable for water well drilling and geothermall well