IADC114 New Steel Tooth Tricone Drill Bit

• Customization: Available
• Type: Core Drill Bit
• Material: Tungsten Carbide
• Model NO.: IADC114
• Usage: Well Drilling
• Rig Type: Mechanical Rig
• Drilling Depth: 1800m
• Tractor Hoist Type: Wheeled Tractor Hoist
• Offshore Unit Type: Jack-up Drilling Rig
• Drill Bit Size: 8 1/2 Inch
• Transport Package: Wooden Case
• Specification: ISO9001
• Trademark: ouyate
• Origin: Hebei Hejian
• HS Code: 82071990
• Production Capacity: 500PCS/Month

Product Description

Surface of cone back and cutters are hard enhanced by high wear resistance tungsten carbide, largely increase the work life of bit.
Optimal cutter rows, cutter quantity, cutter length and cutter structure design largely improve the drilling capability and speed.
Widely used in oil exploration, mining prospecting, subterranean heat, hydrology etc. Steel tooth bit surface apply welding new wear-resisting material, keeping of high mechanical drilling rate, at the same time improve the bit cutting tooth life.
1) Steel tooth bit optimize the design of tooth row number, number of teeth ,showing teeth height and unique alloy tooth outline, give full play to the button bit high wear resistance and excellent cutting ability.
2) The hard satellite material is boned within the groove in the axis of the legs and the bearing contact surface. The special craft process has been applied in the inner surface of the cone which increases the ability of resisting occlusion and enhances the longevity of the bearing.
3) Silvering at inner surfaces of cone enhances the wear-resisting longevity of the bearing.
4) Two high-seturated nitrile butadiene rubber seals are used in the bearing , which ensures the high reliability of the bearing seal structure.
5) The wearing resistance of the bearing is improved by applying hard-facing layer on head bearing surface. So it can enhance the longevity of the bits.

IADC	WOB   (kN/mm)	RPM(r/min)	Applicable formation	Size(inch)
114\115	0.3-0.75	180-50	Soft formation with low compressive strength and high drillability,such as  mudstone,clay,chalk,etc	4 5/8	4 3/4	5 3/4
116\117	0.3-0.8	150-70	Soft formation with low compressive strength and high drillability,such as  mudstone,clay,chalk,etc	5 7/8	6	6 1/4
124\125	0.3-0.85	180-60	Soft formation with low compressive strength and high drillability,such as  mudstone,clay,salt,loose stands,soft limestone,etc	6 1/2	6 3/4	7 1/2
126\127	0.3-0.9	150-60	Soft formation with low compressive strength and high drillability,such as  mudstone,clay,salt,loose stands,soft limestone,etc	7 7/8	8 3/8	8 1/2
134\135	0.35-0.95	150-50	Soft to medium formation with low compressive strength or soft with harder streaks,such as  mudstone,shale,soft limestone ,sands,etc	8 3/4	9 1/2	9 5/8
136\137	0.35-1.0	120-60	Soft to medium formation with low compressive strength or soft with harder streaks,such as  mudstone,shale,soft limestone ,sands,etc	9 7/8	10	10 5/8
214\215	0.4-0.95	150-60	medium  hard formation with high compressive strength ,such as  medium soft shale,anhydrite,medium soft limestone ,medium soft sandstone as well as thick and hard streaks,etc	11	11 5/8	12 1/4
216\217	0.4-1.0	100-60	medium  hard formation with low compressive strength ,such as  medium soft shale,limestone and sandstone as well as thick and hard streaks,etc	13 5/8	13 3/4	14 3/4
244	0.35-0.95	150-50	medium  hard formation with high compressive strength ,such as  hard shale,sands ,limestone,etc	15	15 1/2	16
246\247	0.4-1.0	80-50	medium  hard formation with high compressive strength ,such as  hard shale,sands ,limestone,etc	17 1/2	20	22
324\325	0.4-1.0	120-50	hard formation with  high strength and abrasiveness such as hard limestone,hard sands,dolomite,hard shale,etc	24	26