3 7/8 Inch 98mm Petroleum Well Drill Three Roller Cone Bit IADC 117 Steel Tooth Bit

• Customization: Available
• Customized: Customized
• Standard: API
• Usage: Well Drilling
• Certification: ISO
• Model Number: Steel Tooth Bit, TCI Bit
• Bearing Type: Sealed Bearing
• Suitable Formation: Soft, Medium Soft, Hard, Medium Hard, Very Hard
• Color: Blue or Red
• Transport Package: Wooden Case
• Specification: according requirement
• Trademark: HJ
• Origin: China
• HS Code: 8207191
• Production Capacity: 500

Product Description

Product Description

  

HENGJI BIT  SPEC		IADC CODE 117
Diameter	3 7/8"(98mm)
Tooth Type	Milled tooth/steel tooth
Bearing Type	Elastomer sealed bearing
Circulation Type	Mud fluid
Thread Connection	3 1/2 API REG PIN
Nozzle	center flush hole
Gauge Protection	Available
Shirttail Protection	Available
Operating Parameters
RPM(r/min)	180~60
WOB(KN)	0.3~0.75
Formations	Very soft formations with low compressive strength and high drillability, such as clay, mudstone, chalk, etc
Application	water well drilling,oil &gas well drilling ,HDD,exploration,geothermal well drilling,drilling projects,etc

 

Detailed Photos

 

 

1. Journal bearing. Hardfaced head bearing surface.Inne hole of ocne is silve-plated.The load capacity and seizure resistance of the bearing is greatly improved.
2. O ring seal is mode of more wear resistant and high saturated buna-N with the increased seal section and precisely designed scaling flange in the cone sealing ares has increased the reliability of the seal.
3. All rubber compensator is used which can limit pressure differential and prevent drilling fluid from entering the lubrication system and thi provides the bearing system with good assurance of lubrication.
4. High weat resistance and excellent cutting ability pf the insert bit are given full play bu using carbide compacts of high strength and high toughness in comnination with optimized compact numbers and rows, the exposure height and special shaped compacts. For steel tooth tricone, the tooth surface is hard taced with new type of wear resistant material and thus has extended working life of the cutting structure while still maintaining high ROP.

 

Tricone rock drilling bit Features

  Bearing Structure
High precision journal bearing with two thrust faces. Ball locked cone. Hardfaced head bearing surface. Cone bearing inlaid with friction reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved, and suitable for high rotary speed.
Cutting Structure
Reinforcing the comprehensive mechanical properties of cutting tooth by using high quality tungsten carbide inserts of new formula and new techniques of insert bit.
Gauge Structure
The multiple heel position with gauge trimmer on the heel, tungsten carbide and hardfacing on the shirttail, strengthened spear point will enhance the gauge protection.

 

Overview of Tricone Bit

Introducing our high-performing tricone drill bit, designed for a range of drilling projects including oil and gas well drilling, geothermal well drilling, water well drilling, and trenchless drilling. Made with durable materials and advanced engineering, this tricone drill bit is built to withstand tough drilling conditions and deliver exceptional results. Its precision-cut teeth and optimized design ensure efficient and seamless drilling, making it an ideal choice for professionals in the industry. Trust our tricone drill bit to deliver the performance you need for your drilling projects.


 

 

Product Parameters

IADC	WOB (KN/mm)	RPM (r/min)	Applicable Formations
114/116/117	0.3~0.75	180~60	Very soft formations with low compressive strength and high drillability, such as clay, mudstone, chalk, etc.
124/126/127	0.3~0.85	180~60	Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft limestone, etc.
134/135/136/137	0.3~0.95	150~60	Soft to medium formations with low compressive strength and high drillability, such as medium soft shale, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbed, etc.
214/215/216/217	0.35~0.95	150~60	Medium formations with high compress strength, such as medium soft shale, hard gypsum , medium soft limestone, medium soft sandstone, soft formation with harder interbed, etc.
227	0.35~0.95	150~50	Medium hard formations with high compressive strength, such as abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble,etc
Note: The upper limits of WOB and RPM in above table should not be used simultaneously.

IADC	WOB (KN/mm)	RPM (r/min)	Applicable Formations
417/437/  447/415/435	0.35~0.9	150~70	Very soft formations with low compressive strength and high drillability, such as clay, mudstone, chalk, gypsum, salt, soft limestone, etc.
517/527/515	0.35~1.0	140~60	Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft limestone, etc.
537/547/535	0.45~1.0	120~50	Soft to medium formations with low compressive strength, such as medium, soft shale, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds, etc.
617/615	0.45~1.1	90~50	Medium hard formation with high compress strength, such as hard shale, limestone, sandstone, dolomite. etc
637/635	0.5~1.2	80~40	Hard formations with high compressive strength, such as sandstone, limestone, dolomite ,hard gypsum, marble, etc.
Note: The upper limits of WOB and RPM in above table should not be used simultaneously.

Popular models
size	IADC CODE
4 1/2''(114.3mm)	115 117 127 217 417 437 517 537 637
4 3/4''(120.7mm)	115 117 127 217 417 437 517 537 637
5 7/8''(149mm)	115 117 127 217 417 437 517 537 637
6''(152mm)	115 117 127 217 417 437 517 537 637 737
6 1/2''(165mm)	115 117 127 217 417 437 517 537 617 627 637 737
7 1/2''(190mm)	115 117 127 217 417 437 517 537 617 627 637 737
7 7/8''(200mm)	115 117 127 217 417 437 517 537 617 627 637 737 837
8 1/2''(215.9mm)	115 117 127 217 417 437 517 537 617 627 637 737 837
8 3/4''(222.3mm)	115 117 127 217 417 437 517 537 617 627 637 737 837
9 5/8''(244.5mm)	115 117 127 217 417 437 517 537 617 627 637 737 837
9 7/8''(250.8mm)	115 117 127 137 217 417 437 517 537 617 627 637 737 837
11 5/8''(295.3mm)	115 117 127 217 417 437 517 537 617 627 637 737 837
12 1/4''(311.1mm)	115 117 127 217 417 437 517 537 617 627 637 737 837
14 3/4''(374.7mm)	115 117 127 217 417 437 517 537 617 627 637 737 837
15 1/2''(393.7mm)	115 117 127 217 417 437 517 537 617 627 637 737 837
17 1/2''(444.5mm)	115 117 127 217 237 417 437 517 537 617  637
20''(508mm)	115 117 127 217 237 437 517 537 637
22''(558.8mm)	115 117 127 217 437 517 537 637
24''(509.6mm)	115 117 127 217 437 517 537

 

Packaging & Shipping

Packaging  

Wood Box
Fumigation Tray if necessary
Other special package can be applied according to customer's need  

Delivery 
 

Prepared to deliver within 1 week, if in stock
Depends on order quantity, when out of stock
Transportation:By sea or air  

 

Company Profile

 

 At Hengji, you can find a wide variety of drill bits to suit your needs. Our selection includes TCI tricone bits, steel tooth tricone bits, single roller cone bits, PDC bits, hole openers, drag bits, and more.

We have exported our bits to 58 countries worldwide, earning approval as a trusted manufacturer and supplier for renowned oil and gas companies. In fact, we are recognized as a reputable OEM supplier and manufacturer for many famous brands.

As an ISO9001 and SGS certified drill manufacturer, we take pride in delivering high-quality drill bits at competitive prices. We also offer convenient door-to-door delivery service. Simply send us an email to inquire about our best prices today.

Certifications

 

Our Advantages

--The first-class engineers of tricone bits and PDC bits
--Advanced technology and Equipment, International standard.
--R&D center for rock drilling tools, high precision CNC machines, SGS&ISO Certified.
--10+ Years & 40+ Countries service experience.
--Optimized solutions for various of requirement.

 

FAQ

FAQ
FAQ
1. Does your company make or distribute products?
A: We are a professional factory in China that specializes in producing tricone bits, PDC bits, hole opener,single cone bit and drag bit.

2. Can you tell me about your products?
A: Our products and services are accredited to ISO 9001:2008, ensuring that our mature production technology guarantees international-quality products. We offer many high-quality products which can be found on our website (https://hb-bits.en.made-in-china.com/) . 
.

3. What is your packaging and delivery process?
A: We use high-quality export cartons or standard export wooden cases for packaging.

4. How long does delivery take?
A: If the product is in stock, we can deliver it within a week. If it is out of stock, delivery can take 7-30 days depending on the order quantity. Transportation is available by sea or air.

5. How can I order your products?
A: Simply send us an inquiry with a detailed item description or model number. If you have no packing preference, we will use the standard sea-way packing. To avoid any confusion, please attach a reference picture or link to our website for better understanding.
6.What is the website about your factory?
  A:Our website is: //hb-bits.en.made-in-china.com