| Customization: | Available |
|---|---|
| Type: | Ground Anchor Equipment |
| Material: | Carbon Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
KD SERIES single cone bit
Cutting Structure
In response to the characteristics that inserts in different areas on the cone have different cutting actions, conical inserts are placed in permanent contact area and aedge inserts are placed in alternative contact area so that the drilling efficiency is greatly improved. Wear resistance of cutting structure is enhanced by setting diamond inserts in the permanent contact area of the cone where inserts are severely worn. Tungsten carbide inserts are placed on cone top face to protect cone body from abrasive erosion.
Gauge Structure
With active cutting protection inserts on bit body, the bit has good gauge protection and updrill capability.
Bearing Structure
High precision journal bearing. Balls lock the cone. Hardfaced head bearing surface. Cone bearing surface. Cone bearing inlaid wit friction-reducing alloy. Abrasion resistance and seizure resistance of the bearing are improved. Compared with three cone bit, the leg bearing is bigger, so it can receive higher WOB and high reliability.
Hydraulic Design
Small angled watercourse design increased the shirttail thickness and can effectively prevent the watercourse erosion. Optimized hydraulics structure improves the cleaning capability abd increase ROP.
Product Application
It is suitable for sidetracking, deep well drilling and old well repairing.
Bit Size |
Bite Type |
|
In |
mm |
|
4 1/8 |
104.8 |
KD527 KD 547 KD 617 |
4 1/2 |
114.3 |
KD527 KD 547 KD 617 |
4 5/8 |
117.5 |
KD527 KD 547 KD 617 |
4 7/8 |
123.8 |
KD527 KD 547 KD 617 |
5 1/2 |
139.7 |
KD527 KD 547 KD 617 |
6 |
152.4 |
KD527 KD 547 KD 617 |
6 1/2 |
165.1 |
KD527 KD 547 KD 617 |
7 1/2 |
190.5 |
KD527 KD 547 KD 617 |
7 7/8 |
200.0 |
KD527 KD 547 KD 617 |
8 1/2 |
215.9 |
KD527 KD 547 KD 617 |
IADC |
WOB KN/MM |
RPM r/min |
Application Formations |
527 |
0.3-0.7 |
120-50 |
Soft formation with low compressive strength and high drill ability, such as mudstone, gypsum, salt, soft shale, soft limestone. etc. |
547 |
03.-0.7 |
100-50 |
Soft to medium formations with low compressive strength and high drill ability, such as mudstone, gypsum, salt, soft shale, soft limestone. medium formation with harder and abrasiver interbeds,etc. |
617 |
0.4-0.8 |
90-50 |
Medium hard formations with high compressive strength, such as hard shale, limestone, sandstone, dolomite, etc. |
){kind=link}